Rustyice Solutions Blog
Read All About It

Search Our Site

Our Newsletter

Our Ramblings

Enhancing Oil,Gas and Power Operations – SCADA via Satellite

Oil and gas operations are located in unforgiving environments, from the blistering cold of the arctic to the scorching heat of the deserts and the storming conditions out on the open sea. To sustain secure operating conditions in these remote areas, reliable communication is as vital to the end-user as the umbilical cord is to an unborn child.

 

Supervisory Control And Data Acquisition

Supervisory control and data acquisition (SCADA) is a unique aspect of oil, gas and power distribution operations in that it does not entail communication between people, but between machines, also known as machine–machine (M2M).

SCADA describes a computer based system that manages mission critical process applications on the ‘factory floor’. These applications are frequently critical for health, safety and the environment.

The term telemetry is often used in combination with SCADA. Telemetry describes the process of collating data and performing remotely controlled actions via a suitable transmission media. In the context of this article, the telemetry media is a satellite communications solution.

SCADA in Oil, Gas and Power Distribution Operations

SCADA is not limited to a particular aspect of these types of operations. In the Oil and Gas industry, SCADA applications can be found in upstream areas such as well monitoring, downstream in areas such as pipeline operations, in trade by managing the fiscal metering/custody transfer operations and logistics in applications such as inventory management of tank storage facilities. SCADA systems in the Power Distribution industry use RTUs and PLCs to perform the majority of on-site control. The RTU or PLC acquires the site data, which includes meter readings, pressure, voltage, or other equipment status, then performs local control and transfers the data to the central SCADA system. However, when comparing and specifying a solution for challenging SCADA environments, RTU and PLC-based systems are not equal.

PLC Systems are Sub-Optimal for Complex SCADA Systems

Originally designed to replace relay logic, PLCs acquire analog and/or digital data through input modules, and execute a program loop while scanning the inputs and taking actions based on these inputs. PLCs perform well in sequential logic control applications with high discrete I/O data counts, but suffer from overly specialized design, which results in limited CPU performance, inadequate communication flexibility, and lack of easy scalability when it comes to adding future requirements other than I/O.
With the rapid expansion of remote site monitoring and control, three critical industry business trends have recently come into focus:

• System performance and intelligence – Process automation improves efficiency, plant safety, and reduces labor costs. However, complex processes like AGA gas flow calculations and high-resolution event capture in electric utility applications require very high performance and system-level intelligence. The reality is that even high-performance PLCs cannot meet all these expectations.

• Communication flexibility – Redundant communication links between remote systems and the central SCADA application form the basis of a reliable, secure, and safe enterprise. Power routing automation in electric applications, water distribution, warning systems, and oil and gas processes all require unique communication mediums including slow dial-up phone lines, medium speed RF, and broadband wired/wireless IP.

• Configurability and reduced costs – Although process monitoring and control are well defined and understood within many industries, the quest for flexibility and reduced Total Cost of Ownership (TCO) remains challenging. In the past, proprietary PLC units customized with third party components filled the niche, but suffered from lack of configurability and higher maintenance costs than fully integrated units. Today, businesses look for complete modular off-the shelf systems that yield high configurability with a significant improvement in TCO.

At the technical level, several requirements currently influence the SCADA specification process:
• Local intelligence and processing – High processing throughput, 64 bit CPUs with expanded memory for user applications and logging with support for highly complex control routines.

• High-speed communication ports – Monitoring large numbers of events requires systems that support multiple RS232/485 connections running at 230/460 kb/s and multiple Ethernet ports with 10/100 Mb/s capability.

• High-density, fast, and highly accurate I/O modules Hardware that implements 12.5 kHz input counters with 16-bit analog inputs and 14-bit analog outputs for improved accuracy.

• Broadband wireless and wired IP communications. Recent innovations in IP devices demands reliable connectivity to local IEDs (Intelligent Electronic Devices) as well as emerging communication network standards.

• Strict adherence to open standard industry protocols including Modbus, DNP3, and DF-1 on serial and TCP/IP ports

• Robust protocols for support of mixed communication environments.

• Protection of critical infrastructure – Enhanced security such as password-protected programming, over the air encryption, authentication, and IP firewall capability.

Selecting a Satellite Communication Solution – Factors to Consider

Security

When selecting a satellite communications solution, there are numerous factors that must be considered. Enterprise applications like e-mail, Internet access, telephony, videoconferencing, etc. frequently tie into public communications infrastructure. Due to security and reliability considerations it is considered best practice to isolate mission critical SCADA communications infrastructure from public networks.

The Rustyice solution is a dedicated satellite communications network solution tailored for the SCADA applications environment. By virtue of system design, our solution offers greater security against hacker attacks and virus infestation which mainly target computers that are connected to the Internet and are running office applications.

Reliability

Due to the critical nature of most SCADA operations, a reliable communication solution is of utmost importance. The satellite communications industry is mature with a proven track record. Satellite transponder availability is typically in the 99.99 percentile range, a number far superior to that of terrestrial networks. To build on this strength, our solution utilises a miniature satellite hub that is deployed at the end-users SCADA control centre. Data to/from the remote terminal units (RTUs) are piped directly into the SCADA system. There is no vulnerable terrestrial back-haul from a communication service providers facility, which can cause the entire network to crash if cut during public works, i.e. digging.

To increase the reliability of the hub, it is frequently deployed in a redundant/load sharing configuration. This ensures that the hub is available more than 100% of the time, making it far from the weakest link in the communication chain.

Types of Connectivity

Contrary to enterprise-related communications which take place randomly, SCADA communication is quite predictable. It is a continuous process, where the SCADA application polls the RTUs at regular intervals. The outgoing poll request is a short datagram (packet) containing as few as 10 bytes. The returned data from the RTUs are also in a datagram format with the message size being from 10 bytes to 250 bytes. One could easily assume that a satellite solution based upon dial-up connectivity such as Inmarsat, Iridium or Globalstar would be ideal for this application environment. Since SCADA is not just data collection, but also entails control (which at times can be of an emergency nature), you simply cannot wait for the system to encounter a busy connection. What is needed is a system that provides an ‘always on’ type of connection, commonly referred to as leased line connectivity.

A Rustyice solution supports both circuit switched (leased line and multi drop) and packet switched (TCP/IP and X.25) applications concurrently.

Contact us today to speak to one of our representatives and examine how a Rustyice Satellite SCADA solution can offer your operations the best of all worlds.

0 Comments

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Do You Have a Tip or an Idea for a Story? Tell Us About It.

About Isotope

Isotope is available for purchase or part of a club membership from RocketTheme, inclusive of the RocketLauncher, theme, plugins and sources.

Subscribe Here

Subscribe to our newsletter and stay updated on the latest developments and special offers!